Quickshifter, Powershifter Spare Parts

Spare parts

Order				Click basket to add
TLS-LSMX (linear sensor operates only in compression)	£165.95	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-GPPUSH (tie rod pressure sensor operates only in compression)	£165.95	(ex UK VAT)			Qty req:
TLS-GPPULL (tie rod pressure sensor operates only in tension)	£165.95	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-LSPUSH (linear sensor operates only in compression)	£165.95	(ex UK VAT)			Qty req:
TLS-LSPULL (linear sensor operates only in tension)	£165.95	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-TRK (3 piece tie rod kit, from 160mm up to 280mm in length)	£25.52	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-HBB-1 (single button bracket for 7/8" dia handle bars)	£25.52	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-HBB-2 (double button bracket for 7/8" dia handle bars)	£34.03	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-HBB-1-B (single button bracket for 7/8" dia handle bars with button assembly)	£51.05	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-HBB-2-B (double button bracket for 7/8" dia handle bars with button assembly)	£59.66	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-HBB-HD-VR-2-B (double button bracket Harley Davidson 2003 onwards)	£59.66	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-SS (retro-fit speed sensor)	£51.05	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-QS2ECU (QS2 ECU with Intellishift^TM and plug&play connectors)	£148.93	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-PSECU (powershift ECU with PWM drive system)	£165.95	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-QS4ECU (QS4 ECU with AST + Intellishift^TM and plug&play connectors)	£191.48	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-PS-QSECU (PS ECU with AST + Intellishift^TM and plug&play connectors)	£191.48	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-PS-QSH (powershift quickshifter harness for single cylinder engines)	£17.01	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-QS6ECU (quickshift ECU for single cylinder engines)	£85.10	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-RS (remote shiftlight cluster)	£34.03	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-PS (powershift shifter, available only for Translogic TLS-PS1-2 systems)	£306.37	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-MD-MB-GSXR-K1-5 (check bracket suitability)	£25.52	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-MD-MB-GSXR-K5-6 (check bracket suitability)	£34.03	(ex UK VAT)			Qty req:
TLS-MD-MB-GSXR-K7 (check bracket suitability)	£34.03	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-LSMX-MB-YZF250 (mounting bracket for YZF250 year 04-06)	£12.76	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-LSMX-MB-YZF450 (mounting bracket for YZF450 year 04-06)	£12.76	(ex UK VAT)			Qty req:

Order				Click basket to add
TLS-LSMX-MB-RMZ450 (mounting bracket for RMZ450 year 04-06)	£12.76	(ex UK VAT)			Qty req:
TLS-LSMX-MB-CRF450 (mounting bracket for CRF450 year 04-06)	£12.76	(ex UK VAT)			Qty req:
TLS-LSMX-MB-KX450 (mounting bracket for CRF450 year 04-06)	£12.76	(ex UK VAT)			Qty req:

If there are any spare parts not listed that you require please contact
Translogic Systems Ltd through our contact page.

Thankyou.

Translogic Quickshifters race dash perfomance exhaust alternative

Get on the motorcycle.
Start the engine in neutral.
Squeeze the clutch lever with your left hand all the way to the grip.
Place your left foot on the gear shifter and kick straight down to first gear.
Give a little throttle with your right hand. Don't race the engine.
Slowly release the clutch with your left hand while maintaining engine speed with your right hand on the throttle.
Balance the bike and move off slowly.
After you are moving and balanced, put your left toe under the gear shifter.
Squeeze the clutch and release tension on the throttle a little.
Smartly kick upward with your toe on the bottom of the gear shifter. You are now in second gear.
Release the clutch smoothly and simultaneously apply more throttle.
As you gain more speed, repeat the above steps for third, fourth, and fifth gears.
Downshifting is done similarly except you sharply kick down on the gear shifter to go to the next lower gear.
As you come to a stop, squeeze the clutch and kick down on the gear shifter, one gear at a time, timing it so you are in first gear as you stop.

Practice use of the clutch and throttle together so as not to stall the engine.
If you should stall the engine, make sure you have the front wheel straight ahead. Otherwise, you will fall.
Practice getting the gear shifter into neutral while stopped. Neutral is between first and second gear.

The GDU offers visual confirmation of gear selection within the transmission. This Ultra-Bright seven segment LED, (Light Emitting Diode). is among the brightest available. This display coupled with the precision Clarex™. smoked black window diffuser produces the highest contrast available for improved day light viewing and exceptional night time clarity. The sensor is the pinnacle of positional monitoring technology and is manufactured to high tolerance specifications allowing repeatability in production to within a measured tolerance of plus or minus 1%.

This Ignition interrupt (quickshifter) is probably the smallest, lightest and most technologically advanced system available. The Ezeshift is manufactured to the highest standard using high tolerance components and latest SMT, (Surface MountTechnology.) The Ezeshift negates the use of the clutch and throttle rolling while making upshifts and is designed to compliment virtually all variants of ignition systems.The Ezeshift System has the added benefit of offering visual confirmation of gear selection within the transmission utilising the GDU. Both the Ezeshift and the Ezeshift System use the same high specification sensor as the GDU.

The Powershift is the first tiptronic gear shift product of its type. This unique linear design allows fitment in confined areas as well as combining incredible power. The Powershift stands apart from its competitors by utilising DC motor and planetary gearbox technology which is then transferred into linear motion. The Powershift ven facilitates manual gear selection when fitted. Gears can be selected both up and down by the touch of a button.

The Powershift is available with a built in Ignition interrupt (quickshifter). This built in feature negates the use of the clutch and throttle rolling while making upshifts and like the Ezeshift is designed to compliment virtually all variants of ignition systems. Like the Ezeshift System the Powershift System also has the added benefit of offering visual
confirmation of gear selection within the transmission system utilising the GDU and sensor.