Replacement motorcycle
gauges for race bikes with lap timer...
Micro Dash 2
Digital
LCD gauges for race bikes
Order
Click
basket to add
Installation
What will it look
like on my Superbike?
Click here
for full size Micro Dash digital LCD gauges you can print and then cut out and
offer up into position.
Will it fit my bike?
GSXR
(all models)
-
CBR
(all models)
- YZR
(all models)
-
ZXR (all models)
-
DUCATI
(all
models without key fob security and CanBus,
not suitable for models 749 & 999 and later)
NOTE:
**Universal**
The Micro Dash digital LCD gauge will work on any motorcycle application
regardless of manufacturer or model unless there is a key fob
security device that communicates with the original gauges featured
on the motorcycle.
Technical support
As with all Translogic
products there is free technical support over the phone and
by email for our customers should you require any assistance
with the Micro Dash installation.
Features
Replaces the standard gauges
with a Race Dash System
This Micro Dash
motorcycle gauge utilises the pinnacle of LCD technology culminating in the perfect
contrast for daytime clarity and backlighting at night.
The Micro Dash LCD gauge is machined from billet aluminium
for superior durability. This replacement gauge offers user defined `cool blue' or `soft red' backlighting,
gear position indication, comprises a 7 Mega-bright LED shiftlight
array for optimum rpm gear shifts, a lap timer which is operated
manually by the sealed tactile waterproof button which is supplied
either separately or assembled into a CNC machined handle bar
bracket suitable for 7/8" dia handle bars. There is a
large sweeping bar graph type tacho gauge rpm indicator, speedometer reading,
also temperature, battery voltage, neutral selection and high
beam activation and 2 input channels which are ideal for indicators.
You can select between KMH or MPH configurations and there is
a user defined low fuel level warning indication.
The TLS-MD2 Micro
Dash digital motorcycle gauge comes with a unique mounting bracket kit as standard
used to attach the Micro Dash race bike gauge into the original gauge position
on a motorcycle. All Micro Dash gauge systems feature a universal
wiring harness and fitting kit which can be custom fitted to
any motorcycle other than motorcycles/vehicles with built-in
security devices that communicate between the ignition key and
the original OEM gauges. The Micro Dash digital
motorcycle gauge is weatherproof
to IP66 specifications.
Lap-Timer
Infra-Red Transmitter & Receiver
"This Infra-Red Lap-Timer system
is an infrared receiver and transmitter that produces a
signal to the receiver when it passes through the finishing
line. It features a
precision
of
1/100s. Connecting this IR-system
to the proper lap timer button input of the
Translogic Micro Dash
allows you to see your lap time directly on the Micro Dash
for on-the-fly viewing and then with the use of the button
the lap times can be reviewed when you return to the pits."
"This model has a default 30
seconds `dead' time during which the receiver remains blind
to other signals from the transmitter after
receiving the first initial
signal. This illuminates possible multiple triggers
due to
the presence of more than one
transmitter on the pit wall."
General information
The Micro Dash
LCD gauges require attaching to your existing wiring loom. The universal
wiring harness supplied have been designed to lay through the
bike so the appropriate wires fall into their respective positions
close to the connection areas. Typically there are 7 wires
to connect if all the features are required, neutral, high beam,
indicators left and right, oil pressure/level, +12v ignition
on supply and RPM sensing.
The temperature
sensor is supplied in the universal harness and is a copper
ring terminal thermister type, very accurate.
This sensor is
attached to one of the thermostat housing bolts on the back
of the block on the opposite side to the exhaust headers. The
software within the Micro Dash compensates for the temperature
differential between the inside and the outside of the head
surface, approximately 4-6 degrees.
The Micro Dash
gauge is mounted using the 4 brackets and bobbins supplied with the
kit. These items can be adjusted to suit providing
an effective mounting solution. Translogic offers some specific
Micro Dash mounting brackets for some popular models, check
the suitability of these brackets to ensure you order the
correct item.
Electronic speed
sensor
The retro-fit
speed sensor needs to be positioned so it is directed at between
2 and 6 ferrous metal targets rotating on the rear wheel, either
the sprocket nuts or the brake disc rivets are ideal, (stainless
steel or aluminium nuts/rivets are not suitable). A universal
bracket is supplied with each Micro Dash kit.
Dimensions...
Overall dimension - 156mm
(192mm MAX) X 115mm X 26mm. Viewing area - 130mm X 71mm
(MAX)
Weight (packaged) - 1.4kgs
Delivery time
Shipping is carried out within
2 days of receipt of order. Typical UK destination total
delivery time is 3-4 days, Europe and US deliveries are 5-7
days, rest of the world 10-15 days.
|
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||